High Density MTP Cables Assemblies and MTP Cassettes


IT operations are crucial to the organization for business continuity. Data centers are the central location for data interchange in IT operation of organizations and networked server farms. Ribbon fiber cables, array-based fiber connectors, and packaged breakout assemblies provide modular small form factor connectivity and enable fast, reliable interconnection of fiber optic links in high-density data center environments. Higher bandwidth requirement for 10G/40G/100G parallel optics, requirement to reduce cable size for better air flow, structured zone approach, reduction in rack space, higher density of servers and ports and reduction in installation time has brought in requirement for factory terminated high density cabling solutions. Factory terminated cable systems reduce installation time and offer scalable design and implementation. The following are MTP cable and high density MTP cassettes from FS.COM.

High Density MTP Cassette

MTP Cassette modules provide a secure transition between MTP and LC or SC discrete connectors. They are used to interconnect MTP backbones with LC or SC patching. LC to MTP and SC to MTP Fiber module provides a quick and efficient way to deploy up to 24 LC or 12 SC fiber ports in a single module. This factory terminated and tested ports are protected within the housing for reliably high performance and simply connected via 12-strand MTP ports. Modules are available in OM3, OM4 & SM fiber.

FS.COM MTP cassettes are enclosed units that contain 12 or 24–fiber factory terminated fan-outs inside. These cassettes serve to “transition” small diameter ribbon cables terminated with an MTP connector to the more common LC or SC interface used on the transceiver terminal equipment.

High Density MTP Cables

The fan-outs typically incorporate SC, LC connectors plugged into adapters on the front side of the cassette and an MTP connector plugged into an MTP adapter mounted at the rear of the cassette. One or more MTP fan-out assemblies may be installed inside the cassette to connect up to two 12-fiber ribbon cables for a total of 24 fibers. Alignment pins are pre-installed in the MTP connector located inside the cassette. Now the following is the MTP trunk cable.

Pre-connector MTP Cables are made up of 12, 24, 48 fiber LSOH jacketed micro cables terminated at both ends with MTP® Connectors (without pins). These are used as the backbone or horizontal cable interconnections. These plug and play solutions with micro core cable maximize bend radius and minimize cable weight and size. MTP Trunk Cable is factory pre-terminated, tested and packed along with the test reports. These assemblies are available in OM3, OM4 and SM fiber. Standard lengths of 5, 10, 25 meters are available. Custom lengths are also available on request. The MTP cables are packed as coils in lengths up to 50m long and on reels.

High Density MTP Breakout Cable

MTP Breakout Cable is a type of fan-out fiber optic cable ideal for data distribution to patch panels. These can be configured with 12 fiber, 24 fiber, and 48 fiber MTP connectors. They are available in both male and female MTP connectors, and also come with LC, SC, ST, and FC connectors on the fan outside.

Pre-connector MTP breakout cable assemblies are designed for high density applications which require high performance and speedy installation without onsite termination. MTP breakout cable is made up of 12 LSOH jacketed cable terminated at one end in MTP connectors, through a bifurcation unit, to SC or LC connectors terminated on 2mm OD simplex cables. These are used to connect equipment in racks to MTP cables. MTP cables are numbered for full traceability. Available in 12 core configuration, these space-saving assemblies come with either MTP Male or MTP Female Connectors on one end and LC or SC Connectors on the other end. They are available in OM3, OM4 or SM fiber in lengths of 5, 10, 25 meters, custom lengths are available on request.

We offer a wide range of MTP Cables including Trunk Cables,  MTP to LC breakout cables and MTP cassettes (or patch panels). All the assemblies are fully compliant with IEC Standards 61754-7 and TIA 604-5. We also provide Customized Service such as optional fiber counts, cable types and lengths etc.