MPO Solution For Gigabit Ethernet


Fiberstore has designed and developed ‘quality product with affordable pricing’ for communication infrastructure solutions. This position has been achieved through our core principle of delivering maximum performance through design excellence. We built our business and products based on high product quality, trust and excellent service. We want to deliver first class solutions and a first class service to our customers.

MPO Fiber Optic Solution is a high performance, preterminated, modular system designed for high density Gigabit Ethernet Applications. It is a Plug and Play Solution that offers excellent performance and speedy installation. MPO Solution can support 10 Gb/s for link lengths up to 300 meters using laser optimized OM3 fiber, and up to 550 meters using laser optimized OM4 fiber, with a low insertion loss of 0.5dB. MPO Module employ high performance MTP adapters from US CONEC.

Fiberstore MPO end to end solution includes:

*MPO Cassette, 12 or 24 SC, LC Ports
*MPO Fanout Hydra Cable with LC or SC Connectors
*MPO to MPO Trunk Cable
*MPO Adapters
*MPO Adapter Plates
*MPO Blanking Plates (for expansion ports)
*MPO Chassis, 14 Vertical Slots, 3U, with 336 fiber terminations
*Modular Patch Panel, 3 Slots, 1U, with 72 fiber terminations

MPO Ferrule is the key component of the MPO Solution is a 12 fibre MPO (multi fibre push on) connector with a housing footprint size of a SC Simplex connector in a single floating ferrule. MPO Solution uses US Conec MTP connector, who are the market leaders. These connectors are made of precision moulded thermoplastic with metal guide pins, precise housing with asymmetrical face that allow only one orientation into the adapter, to ensure polarity is maintained along the channel.

The micro-core cables used in the MPO Cable assemblies gives about 65% reduction in the physical size of the cable per fiber when compared to traditional fiber cables.MPO Solution with 12 core LC quad adapters offers 72 LC terminations in 1U rack space using modular patch panels, and 336 LC terminations in 3U rack space using 3U Chassis. MPO Adapter Panel with 12 Core MPO connectors offers very high connectivity of 288 fibers and with 24 core MPO connectors it doubles to 576 fiber terminations in 1U rack space. Now the following is the Assemblies for Gigabit Ethernet.

MPO Cassette

MPO Cassette offers installers the choice to prepare the distribution units off site and allows for faster termination of the fiber backbone. MPO Modules can support 10Gb/s for link lengths up to 300 meters using laser optimized OM3 fiber, and up to 550 meters using laser optimized OM4 fiber, with an insertion loss of 0.5dB. MPO Module employ high performance MPO connectors for US Conec on
the rear of the units routed to the adapters of your choice in the front.

MPO Cassette

MPO Module can be installed in 1U Sliding Patch Panel and 3U Chassis. They are available with LC and SC connectors, with a choice of Singlemode, Multimode OM3 and Multimode OM4 connectivity.

MPO Trunk Cable

MPO Trunk Cable Assemblies are designed for high density application which offers excellent benefits in terms of on-site installations, time and space saving. These plug ‘n’ play solutions uses micro core cables to maximize bend radius and minimize cable weight and size. MPO Trunk Cables are factory preterminated, tested and packed along with the test reports.

Fiber Trunk Cable

Complied with the standard TIA-568C.3-2008 and YD/T1272.5-2009, it was widely used in the pre-terminated system of the IDC and blocks. This system applies to the 10G Ethernet transmissions and it is also available to the updated system for 40G/100G in the future. MPO trunk cable helps to fast installation for Data Center and other Fiber Optic environment. Its efficient plug and play structure which can significantly lower the installation and daily maintenance costs surpasses MDA, HDA and EDA regional module cassette or fan-out fiber connections. The high quality fiber optic cable and MPO accessories makes up the Linkbasic MPO Trunk cable and provides lower insertion loss and higher return loss so that it fully complied to the high speed network system.

MPO Breakout Cable

Fiberstore MPO cables are designed to offer a high degree of flexibility through available features and options, allowing each cable to be manufactured to fit the exact application. With the multitude of applications and requirements most Multi-Fiber MTP-MPO Breakout cables have. Fiberstore has established an extensive list of standard options ensuring each cable is designed and built to fit your need. Now the following is the MPO Breakout product from Fiberstore.

MPO Breakout Cable Assemblies are designed for high density applications which require high performance and speedy installations without onsite terminations. MPO breakout cables are numbered for full traceability. Available in 12 core configurations, these space saving assemblies come with either MPO Male or MPO Female Connectors on one end and LC or SC Connectors on the other end.

Fiberstore MTP MPO cables are available in single mode, multimode, and laser optimized fiber types, multiple jacket/construction types for different applications, fiber count from 2-72 fibers, and breakout style/length.