Tag Archives: OM3 cables

One Small Problem When We Choose the Fiber Patch Cable

Share

There is a common phenomenon that people are always able to distinguish different types of interfaces easily after corresponding to the given pictures, but when we choose the fiber patch cable, such as the polishing type also confused them, it shows UPC or APC, also confused us, recently I finally understand it and share my ideas with you.

First we can look from the definition, the above are acronyms for the following:

    • UPC – Ultra Physical Contact
    • APC – Angled Physical Contact

Only from the words we can have a simple understanding of them, in order to have a deeper understanding, there i named a few examples for you. Usually when we hear about the description like “fiber patch lc apc lc upc”, “e2000 fc apc”, “sc apc to sc upc single mode 9 125 simplex fiber optic patch cord cable”, what do this words apc upc mean? Then we will give you explanations. In Fiberstore, We use different color to distinguish them, the blue is UPC connector and the green is APC connector, shown as the figure.

In fact, it stands for the polish style of fiber optic core and connect the copper connector of copper cable as medium, and we need to know that the connections between the fiber optic connector and the ceramic core. Different fiber optic connector ring’s size, length and polished style is different, different polish of the fiber optic connector rings result in different performance, mainly on the back reflection. Generally, UPC is 50dB or higher and APC is 60dB or higher. All insertion loss of that they should be less than 0.3dB and the lower insertion loss is, the better performance they have, it is the reason why UPC connector is more widespread than APC. At the same time, there is a point we need to pay attention to, we all know that fiber optic cables can be divided into single mode and multimode fiber cables, but single mode fiber optic cables can be with UPC or APC polished connectors, while multimode fibers are not made with APC connectors. When we talk about the insertion loss, fiber optic attenuators have to be mentioned, it also has the diffent db to choose, as for the more knowledge about it, please always pay close attention to.

Fiberstore, you know, it offers kinds of fiber cables to choose, the different connector series all available for UPC/APC version, and we can also provide SM, MM, OM3 cables, simplex and duplex option, 0.9mm, 2.0 mm, 3.0mm cable diameter for choose, as for the fiber length, it can be customized according to your requirements.

Related Article:  Which Patch Cable Should I Choose for My Optical Transceiver?