Tag Archives: mux demux

Full CWDM Mux Demux and CWDM SFP Transceivers Solutions

Share

CWDM systems have channels at wavelengths spaced 20 nanometers (nm) apart, compared with 0.4 nm spacing for DWDM. This allows the use of low-cost, uncooled lasers for CWDM. In a typical CWDM system, laser emissions occur on full eighteen channels at eighteen defined wavelengths: 1610 nm, 1590 nm, 1570 nm, 1550 nm, 1530 nm, 1510 nm, 1490 nm, 1470 nm, 1450 nm, 1430 nm, 1410 nm, 1390 nm, 1370 nm, 1350 nm, 1330 nm, 1310 nm, 1290 nm, 1270 nm. Besides, for CWDM systems an industry standard color coding scheme is used. The latches of the CWDM SFP transceivers match the colored port indicators on the passive units therefore guaranteeing simple setup. Following color codes and wavelength are valid for CWDM.

cwdm-channels

Full CWDM Channels (18 Channels) Mux Demux Solution

The WDM system uses a multiplexer at the transmitter to combine several wavelengths together, each one carry different signal with bite-rate up to 10G and a demultiplexer at the receiver to split them apart. Both mux and demux are passive, requiring no power supply. The 18 Channels CWDM mux demux covers all channels of 1270nm to 1610nm in 20nm increments. Without replacing any infrastructure, it totally support data rates up to 180 Gbps by being completely protocol transparent. The main fields of applications are the use in SDH (STM-1, STM-4, STM-16, STM- 64), IP (Fast Ethernet, Gigabit Ethernet, 10 Gigabit) ATM and storage (1G, 2G, 4G, 8G, 10G Fibre Channel) networks. Connectors, located on the front of the CWDM mux demux modules, are labeled and use the same color-coding that is used to indicate the wavelength of the individual CWDM SFP transceivers (shown in the figure below).

cwdm-mux-demux

When fiber availability is limited, CWDM mux demux could increase the bandwidth on the existing fiber infrastructure. By using 18ch CWDM mux demux mentioned above and the CWDM SFP transceivers, up to 180 Gbps could be supported on a fiber pair.

18-channels-cwdm-mux-demux

Full CWDM SFP Transceivers Solution

CWDM SFP transceiver is based on the SFP form factor which is a MSA standard build. The max speed of this product is 1.25G and they are also available as 2.5G and of course the popular CWDM 10G SFP transceivers. The CWDM SFP transceiver has a specific laser which emits a “color” defined in the CWDM ITU grid. The CWDM ITU grid is defined from 1270 to 1610nm and has steps of 20nm. So the available wavelength is 1270nm, 1290nm, 1310nm, 1330nm, 1350nm, 1370nm, 1390nm, 1410nm, 1430nm, 1450nm, 1470nm, 1490nm, 1510nm, 1530nm, 1550nm, 1570nm, 1590nm and C. Besides, our CWDM SFP transceivers are similarly color-coded as the CWDM mux demux to help you match the right link connection (shown in the figure below).

CWDM SFP

We can make the CWDM SFP transceivers compatible with every brand (Cisco, HP, H3C, Juniper, Huawei, Brocade, Arista). A lot of brands have vendor locking and only with the proper coding. Fiberstore is specialized in this rebranding or recoding. We have many different switches and routers in our test lab to test the coding. We also use different Optical Spectrum Analyzers to ensure the CWDM SFP transceiver is emitting the right color and has the correct power budget. The CWDM SFP transceiver is used in combination with passive CWDM mux demux, and we can provide you a complete solution and advice on which equipment fits best in your project. Please give us your project details and we will provide the most efficient and economical solution.

1270nm SFP 1290nm SFP 1310nm SFP 1330nm SFP 1350nm SFP 1370nm SFP
1390nm SFP 1410nm SFP 1430nm SFP 1450nm SFP 1470nm SFP 1490nm SFP
1510nm SFP 1530nm SFP 1550nm SFP 1570nm SFP 1590nm SFP 1610nm SFP

CWDM Solutions Offered by FiberStore

Share

As broadband has unveiled a new world for subscriber, full of advanced capabilities and faster speeds. Your challenge is to meet their demands without compromising your budget. Because of its distance, speed and bandwidth potential, fiber optics has become the choice for many service providers. Fiber optic connections typically requires two strands of fiber – one for transmitting and one for receiving signals. But how to do if you need to add services or customers, but you’ve exhausted your fiber lines?

Thanks to CWDM, coarse wave division multiplexing (CWDM) is a method of combining multiple signals on laser beams at various wavelengths for transmission along fiber optic cables. The number of channels is fewer than in dense wavelength division multiplexing (DWDM) but more than in standard WDM.

CWDM has many advantages over DWDM technology in terms of system costs, set-up, maintenance, and scalability. CWDM is a technology which multiplexes multiple optical signals on a single fiber optic stand by using different wavelengths, or colors, of laser light to carry the different signals.

Typical CWDM solutions provide 8 wavelengths capacity enabling the transport of 8 client interface over the same fiber. However, the relatively large separation between the CWDM wavelengths allows expansion of the CWDM network with an additional 44 wavelengths with 100GHz spacing utilizing DWDM technology, thus expanding the existing infrastructure capacity and utilizing the same equipment as part of the integrated solution.

A single outgoing and incoming wavelength of the existing CWDM infrastructure is used for 8 DWDM channels multiplexing into the original wavelength. DWDM Mux Demux and optical amplifier if needed.

The typical CWDM spectrum supports data transport rates of up to 4.25Gbps, CWDM occupies the following ITU channels: 1470nm, 1490nm, 1510nm, 1530nm, 1550nm, 1570nm, 1590nm, and 1610nm, each separated from the other by 20nm. PacketLight can insert into any of the of the 4 CWDM wavelengths (1530nm,1550nm,1570nm and 1590nm), a set of additional 8 wavelength of DWDM separated from each other by only 0.1nm. By doing so up to 4 times, the CWDM network capability can easily expand by up to 28 additional wavelengths.

With FiberStore’s compact CWDM solutions, you can receive all of the above benefits and much more (such as integrated amplifiers, protection capabilities, and integration with 3rd party networking devices, etc.) in a cost effective 1 U unit, allowing you to expand as you grown, and utilize your financial as well as physical resources to the maximum. FiberStore provides all the component involved in the process, such CWDM MUX DWMUX, CWDM OADM, even CWDM SFP transceivers.