Tag Archives: edgeswitch

Compatible SFPs for Ubiquiti EdgeSwitch and UniFi switch

Share

The Ubiquiti EdgeSwitch targets the Broadband / ISP / Carrier market, which offers an extensive suite of advanced layer-2 switching features and protocols, and also provides layer-3 routing capability. The UniFi switch targets the Enterprise / SMB market, which is designed for a wider IT audience, and therefore, tend to be simpler, and easier to use. Both these two types Ubiquiti switchs are supported for SFP fiber connectivity and widely used among people. However, which SFPs can I use with my EdgeSwitch or UniFi switch? This article may give the answer on ubiquiti SFP compatibility.

Which Ubiquiti EdgeSwitch Should I Use?

The EdgeSwitch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. The EdgeSwitch provides total, non-blocking throughput. Among 8-Port model up to 10 Gbps, 16-Port model up to 18 Gbps, 24-Port model up to 26 Gbps and 48-Port model up to 70 Gbps. The following table lists the comparison between EdgeSwitch modules, according to your specific need to choose the right one.

Model Total Non-Blocking Throughput Gigabit RJ45 Ports SFP+ Ports SFP Ports Max. Power Consumption
ES- 8- 150W 10 Gbps 8 N/A 2 150W
ES- 16- 150W 18 Gbps 16 N/A 2 150W
ES- 24- 250W 26 Gbps 24 N/A 2 250W
ES- 24- 500W 26 Gbps 24 N/A 2 500W
ES- 48- 500W 70 Gbps 48 2 2 500W
ES- 48- 750W 70 Gbps 48 2 2 750W
ES- 24- LITE 26 Gbps 24 N/A 2 25W
ES- 48- LITE 70 Gbps 48 2 2 56W
ES- 12F 16 Gbps 4 N/A 12 56W
ES- 16- XG 124 Gbps 4 12 N/A 56W
EdgeMAX – Which SFPs are compatible with EdgeSwitch?

The ubnt edgeswitch provides fiber connectivity options for your growing networks. The 8, 16, and 24-port models include two SFP ports, providing up to 1 Gbps uplinks. For high-capacity uplinks, the 48-port models include two SFP and two SFP+ ports, providing uplinks of up to 10 Gbps. Take the ES‑8‑150W for example, it has 8 Gigabit RJ45 ports and 2 Gigabit SFP ports for 10G applications (shown in the figure below). For SFP ports, we should use SFP modules and fiber patch cable.

edgeswitch
According to an article titled “Which SFPs are compatible with the EdgeSwitch?”published in Ubiquiti Help Center, the following SFP transceivers are compatible with EdgeSwitch (only listed can be found in Fiberstore here).

SFP Model Description
Cisco GLC-SX-MM 1000BASE-SX SFP 850nm 550m Transceiver
Cisco GLC-SX-MMD 1000BASE-SX SFP 850nm 550m DOM Transceiver
HP J4858C 1000BASE-SX SFP 850nm 550m DOM Transceiver
HP J4858A 1000BASE-SX SFP 850nm 550m DOM Transceiver
Cisco GLC-LH-SM 1000BASE-LX/LH SFP 1310nm 10km Transceiver
HP J4859B 1000BASE-LX SFP 1310nm 10km DOM Transceiver
HP J4859C 1000BASE-LX SFP 1310nm 10km DOM Transceiver
Cisco GLC-T 1000BASE-T SFP Copper RJ-45 100m Transceive
Cisco SFP-H10GB-CU1M 1m 10G SFP+ Passive Direct Attach Copper Twinax Cable
Brocade 10G-SFPP-TWX-0101 1m 10G SFP+ Passive Direct Attach Copper Twinax Cable
Which Ubiquiti UniFi Switch Should I Use?

The UniFi POE switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non-blocking throughput, the 24port model supports up to 26 Gbps, while the 48-port model supports up to 70 Gbps. The following table lists the comparison between UniFi switch modules, according to your specific need to choose the right one.

Model Total Non-Blocking Throughput Gigabit RJ45 Ports SFP+ Ports SFP Ports Max. Power Consumption
US- 8- 150W 10 Gbps 8 N/A 2 150W
US- 16- 150W 18 Gbps 16 N/A 2 150W
US- 24- 250W 26 Gbps 24 N/A 2 250W
US- 24- 500W 26 Gbps 24 N/A 2 500W
US- 48- 500W 70 Gbps 48 2 2 500W
US- 48- 750W 70 Gbps 48 2 2 750W
UniFi – Which SFPs are compatible with UniFi Switch?

Each model includes two SFP ports for uplinks of up to 1 Gbps. The 48port model adds two SFP+ ports for high-capacity uplinks of up to 10 Gbps, so you can directly connect to a highperformance storage server or deploy a longdistance uplink to another switch. Take the US- 8- 150W for example, it has 8 Gigabit RJ45 ports and 2 Gigabit SFP ports for 10G applications (shown in the figure below). For SFP ports, we should use SFP modules and fiber patch cable.

us-8-150w
According to an article titled “Which SFPs can I use with UniFi switch?”published in Ubiquiti Help Center, the following SFP transceivers are compatible with EdgeSwitch. Since among some SFP module types are the same as the EdgeSwitch, I only list the different SFPs here.

SFP Model Description
Fiberstore SFP-1G85-5M

Now: SFP1G-SX-85

1000BASE-SX SFP 850nm 550m DOM Transceiver
Cisco SFP-10G-SR 10GBASE-SR SFP+ 850nm 300m DOM Transceiver
Fiberstore SFP-10G85-3M

Now:
SFP-10GSR-85

10GBASE-SR SFP+ 850nm 300m DOM IND Transceive
Ubiquiti SFP Compatibility: Ubiquiti Compatible SFPs in Fiberstore

Fiberstore (FS.COM) provides a series of Ubiquiti compatible SFP transceivers that can be used with EdgeSwitch and UniFi switch. In Ubiquiti Networks Community SFP modules compatibility section, some people tested Fiberstore SFP modules in their EdgeSwitch. As shown in the figure below, SFP1G-SX-85, SFP1G-SX-31 and SFP-10GSR-85 SFPs are working.

sfp-modules-compatibility

Related Article: 3rd Party Optical Transceivers vs OEM Switch Warranty