Tag Archives: AOC

Different Applications for 10G SFP+ Cables

FacebookTwitterGoogle+LinkedInRedditTumblrShare

10G SFP+ cables are of various kinds, including DACs, AOCs, and other 10G SFP+ optics (10GBASE-SR/LR/ER/ZR and 10GBAE-T copper transceivers) plus patch cables and copper cables, which are widely adopted in data centers to connect servers, storage appliance and switches. Each of them has different application for different distance. Next, we will talk about these cables respectively.

10G DAC: Server to Switch Connectivity

Direct attach cable (DAC) is a type of sheathed high-speed cable featuring SFP connectors on either termination. The main utility of direct attach cables lies in connecting server to switch within the rack. Top-rack interconnections in data centers are made of 10g direct attach cables these days to provide better alternative to RJ 45 connectors, which are losing their foothold because of the bulkier interface and availability of very few equipment and protocol appearing in their compatibility matrix. For any short range connection measuring as small as 5 m to 10 m, a better performing direct attach cable offers easier and more affordable solution. Servers are typically connected to a switch within the same racks. DAC supports link length up to 7 m, making it perfect for servers to switch connections.

FS 10G DACs are available with different lengths with customized services being offered too. And every cable is individually tested on corresponding equipment such as Cisco, Arista, Juniper, Dell, Brocade and other brands, having passed the monitoring of FS intelligent quality control system. Part of the products are shown in the picture below.

10G AOC: Switch to Switch Connectivity

10G active optical cable (AOC) assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fibre Channel applications, which can also be used as an alternative solution to SFP+ passive and active copper cables while providing improved signal integrity, longer distances, superior electromagnetic immunity and better bit error rate performance. They allow hardware manufactures to achieve high port density, configurability and utilisation at a low cost and a reduced power budget. Unlike DAC, which is often applied in short distance, AOC can achieve transmission distance up to 100 m, so they often used in switch to switch connections.

10G SFP+ Cables

FS active optical cable (AOC) assemblies use active circuits to support longer distances than standard passive or active SFP+ Copper Cables. FS offers Cisco compatible AOC which is designed for high speed, short range data link via optical fiber wire.

10G SFP+ Optics: Server/Storage to Switch Connectivity

10G SFP+ transceivers, including 10GBASE-SR/LR/ER/ZR and 10GBAE-T copper transceiver, are designed for CWDM and DWDM applications. The range of transceivers supports 850nm, 1310nm, 18 channel for CWDM applications and 40 channels for DWDM applications. These optical transceivers are available with short haul or long haul receivers. Since server or storage to switch connection requires reliable, scalable and high-speed performance, transceivers plus patch cables are usually adopted to achieve such a connection.

10G SFP Cables

FS 10G transceivers are of various types, including GBIC, SFP+, XFP, X2, XENPAK optics, which can be deployed in diverse networking environments. With an industry-wide compatibility and strict test program, FS 10G SFP+ modules can give customers a wide variety of 10 Gigabit Ethernet connectivity options such as server/storage to switch connectivity.

Conclusion

Different 10G SFP+ cables are selected for different distance and application. Generally speaking, 10G DAC is perfect for short reach applications within racks, while AOCs are suitable for inter-racks connections between ToR and EoR switches. With excellent quality and lifetime warranty, FS 10G optics brings real-time network intelligence to the financial services market at 10 Gbps speeds. All the products mentioned in the previous text are in stock. For more information, please visit us at www.fs.com.

Do You Know about Active Optical Cable (AOC)?

Bandwidth usage is soaring, driven by the proliferation of Internet-connected devices. At this time, active optical cable (AOC) has emerged. Besides, the market of AOCs keeps growing and has a broad prospect. What’s active optical cables? Why should we use it? In this article, some knowledge of active optical cables will be provided.

Introduction to Active Optical Cable (AOC)
Active optical cable (AOC) is used for short-range multi-lane data communication and interconnect applications. Usually, the wire transmission of optical communication should belong to passive part, but AOC is an exception. AOC consist of multimode optical fiber, fiber optic transceivers, control chip and modules. It uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility with standard electrical interfaces. Since people expect more information to be available at their fingertips, our communications systems will need to be quicker, and AOC is one of the best solutions to solve this problem. Compared with direct attach copper cable for data transmission, AOC provides more advantages, such as lighter weight, high performance, low power consumption, low interconnection loss, EMI immunity and flexibility. At present, AOC is widely used in many fields as well as promoting the traditional data center to step into optical interconnection.

active optical cable AOC

Differences Between Passive/Active Copper and Active Fiber
Passive cabling provides a direct electrical connection between corresponding cable ends. Active cables provide the same effect but, by embedding optics and/or electronics within the connectors, can overcome some of the limitations of passive cables. While passive cables are always copper-based, active cables can use either copper wire or fiber optics to provide the link between the cable ends. The picture below shows us the leading types of passive and active cables for data center.

Differences Between PassiveActive Copper and Active Fiber

 Why Use Active Optical Cable (AOC)?
Primarily, active optical cable (AOC) assemblies were invented to replace copper technology in data centers and high performance computing (HPC) applications. As we know, copper passive twinax cable is heavy and bulky, making it difficult to physically manage the datacenter. And due to the nature of electrical signals, electromagnetic interference (EMI) limits copper’s performance and reliability. Though there are so many disadvantages of copper cable, at that time, it is the main stream while the idea of AOCs almost seems too good to be true. However, the advantages of AOC make the predecessors look obsolete and unsophisticated, and changes the limitation of copper passive twinax cable as well as playing an important role in high speed data transmission. Nowadays, a variety of AOCs have been launched in the market, such as 10G SFP+ AOCs, 40G QSFP+ to QSFP+ AOCs, 40G QSFP+ to 4 SFP+ breakout AOCs and ,40G QSFP+ to 8xLC breakout AOCs.

Active Optical Cable

Conclusion
Fiberstore‘s AOCs achieve high data rates over long reaches which are the best solutions for high-performance computing and storage applications. We provide many AOC products such as 10G SFP+ AOCs, 40G QSFP+ AOCs, QSFP+ to 4 SFP+ AOCs, and QSFP+ to 8 x LC AOCs. In addition, customized active optical cables are available in various lengths, Cisco compatible and other options. For more detailed information, please visit www.fs.com or contact us over sales@fs.com.

Related Article: QSFP+ and QSFP28 Transceivers Cabling Solutions