Compatible Optical Solution for HPE Procurve 3500yl-48G POE Switch (J8693A)

FacebookTwitterGoogle+LinkedInRedditTumblrShare

The HPE Procurve 3500 and 3500 yl switch series is a group of advanced intelligent-edge switches available with 24-port or 48-port fixed ports. These switches are with a variety of Gigabit Ethernet and 10/100Mbps interfaces. Both 24-port and 48-port switches have POE+, POE and non-POE options. Moreover, Gigabit Ethernet switches are with optional 10GbE module slot. HPE Procurve 3500yl-48G POE switch is one popular model of the 3500 yl switch series. This post will focus on this switch model and introduce compatible transceivers and cables that can be used in it.

HPE Procurve 3500yl-48G POE Switch

HPE Procurve 3500yl-48G POE switch has 44 autosensing 10/100/1000BASE-T ports and 4 dual-personality ports. Each of these four ports can be either an RJ45 10/100/1000 port with POE or an open mini-GBIC slot. It can be used as an advanced access layer switch or small distribution layer switch. With 44 fixed RJ45 10/100/1000BASE-T POE ports, it can support a considerable number of end application. And with an open module slot that supports a maximum of four 10GbE ports, it is flexible and promising when there’s need to upgrade to higher data rate or longer transmission distance.

48-port 3500yl-48g POE switch-1

Figure 1: 48-port HPE procurve 3500yl-48G POE switch.

It should be noted that each of the four mini-GBIC slots is shared with the associated 10/100/1000Base-T RJ45 port. If a mini-GBIC is installed in a slot, the associated RJ45 port is disabled.

4 dual-personality ports of HPE 3500yl-48G-POE

Figure 2: 4 dual-personality ports of HPE procurve 3500yl-48G POE switch.

Supported Transceivers and Cables in HPE 3500yl-48G POE Switch

The HPE Procurve 3500yl-48G POE switch is a multi-rate device that can support various types of network cable; when using the 4 mini-GBIC ports, different optical transceivers and cables can be used in them. For the 44 autosensing RJ45 ports, they can be used for 10/100BASE-T connectivity in half or full duplex mode, or for 1000BASE-T connectivity in full duplex mode. Ethernet cable like Cat5 can achieve the 10/100/1000BASE-T link. In terms of the mini-GBIC port, since there are three optional choices (X2, CX4 and SFP+) for the open module slot, 10G transceivers including X2, CX4 and SFP+ are possibly to be used. The following table explains what network optics and cable can be used. By the way, J8177B Gigabit 1000BASE-T mini-GBIC is not supported on the 3500 switch series.

Table: HPE compatible optical transceivers and cables.

HPE Part Number Description
J9054C HPE J9054C Compatible 100BASE-FX SFP 1310nm 2km DOM Transceiver
J9099B HPE J9099B Compatible 100BASE-BX-D BiDi SFP 1550nm-TX/1310nm-RX 10km DOM Transceiver
J9100B HPE J9100B Compatible 100BASE-BX-U BiDi SFP 1310nm-TX/1550nm-RX 10km DOM Transceiver
J4860C HPE J4860C Compatible 1000BASE-LH SFP 1550nm 80km Transceiver
J4859C HPE J4859C Compatible 1000BASE-LX SFP 1310nm 10km Transceiver
J4858C HPE J4858C Compatible 1000BASE-SX SFP 850nm 550m Transceiver
J9142B HPE J9142B Compatible 1000BASE-BX-D BiDi SFP 1490nm-TX/1310nm-RX 10km DOM Transceiver
J9143B HPE J9143B Compatible 1000BASE-BX-U BiDi SFP 1310nm-TX/1490nm-RX 10km DOM Transceiver
J8438A HPE J8438A Compatible 10GBASE-ER X2 1550nm 40km DOM Transceiver
J8437A HPE J8437A Compatible 10GBASE-LR X2 1310nm 10km DOM Transceiver
J9144A HPE J9144A Compatible 10GBASE-LRM X2 1310nm 220m DOM Transceiver
J8436A HPE J8436A Compatible 10GBASE-SR X2 850nm 300m DOM Transceiver
J9153A HPE J9153A Compatible 10GBASE-ER SFP+ 1550nm 40km DOM Transceiver
J9151A HPE J9151A Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver
J9152A HPE J9152A Compatible 10GBASE-LRM SFP+ 1310nm 220m DOM Transceiver
J9150A HPE J9150A Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver
J9281B 1m (3ft) HPE J9281B Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable
J9283B 3m (10ft) HPE J9283B Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable
Summary

The above mentioned compatible optical transceivers and network cables can work well in HPE Procurve 3500yl-48G POE switch as the original models do, but are much more affordable. These compatible modules are tested in the switch and are ensured to work on it. If you know other working devices in this switch model, welcome to share with me and my readers.